公开课程
Open courses
测量系统分析(MSA)与量规仪校培训班 |
| 标准课时：1天 |
| 参训对象：品管、研发、生技、生产、实验室等主管；工程师及仪器管理等相关人士等 |
- 课程简介
- 课程目标
- 课程纲要
- 讲师简介
良好的品质来自于系统的品质管理制度，而良好的计量仪器是品质保证的前提，为了更好的增强公司品质体质，让学员掌握计量仪器及校正的系统管理，对量测设备校正，量规仪校体系中各种追溯性管理的要求，以便使用量测仪器校正人员对各种仪器具备校正的区别能力。
如何有效落实量测仪器管理，才能更有效地运用到实际工作当中。
ISO9001：2008标准条款的要求：监视和测量装置的控制之要求
Course Background：
Good quality is from a system of quality management systems, and the measuring instruments is the premise of quality assurance to equip trainees measuring instruments and calibration systems management, in order to better enhance the company's quality physique, correction of measurement equipment, gauges the requirements of the instrument school system in a variety of traceability management, in order to use the measurement instrument calibration with correction of the difference between the ability of various instruments.
How to effectively implement measurement instrument management can be more effectively applied to the practical work.
ISO9001: 2008 requirements: monitoring and measuring devices controlled by the requirements of the standard terms and conditions
如何有效落实量测仪器管理，才能更有效地运用到实际工作当中。
ISO9001：2008标准条款的要求：监视和测量装置的控制之要求
Course Background：
Good quality is from a system of quality management systems, and the measuring instruments is the premise of quality assurance to equip trainees measuring instruments and calibration systems management, in order to better enhance the company's quality physique, correction of measurement equipment, gauges the requirements of the instrument school system in a variety of traceability management, in order to use the measurement instrument calibration with correction of the difference between the ability of various instruments.
How to effectively implement measurement instrument management can be more effectively applied to the practical work.
ISO9001: 2008 requirements: monitoring and measuring devices controlled by the requirements of the standard terms and conditions
节约大量外校资金几千元到几万元，甚至几十万元；企业一次投资常年受益；
计量器具出现问题可随时检定、校准节约时间，保证质量；
因不需要送出外校，生产不会停下来；
企业培训了自己的计量技术人员，为企业内部校验技术人员提供理论依据；
培训合格，颁发内部校验员合格证书；
Course features and purpose:
Save a lot outside calibrating funds of a few thousand dollars to several million, even a few hundred thousand dollars; Enterprises invest onetime, benefit perennial.
The measuring instruments can be calibrated at any time if it has problem, it will be saved time and ensured quality.
Due to the measuring instruments do not need to send outside for calibrating, the production will not stop.
Enterprise train their measurement and technical personnel, can provide theoretical basis for t internal check technicians;
After training and test is qualified, will be awarded an internal check member certificate.
计量器具出现问题可随时检定、校准节约时间，保证质量；
因不需要送出外校，生产不会停下来；
企业培训了自己的计量技术人员，为企业内部校验技术人员提供理论依据；
培训合格，颁发内部校验员合格证书；
Course features and purpose:
Save a lot outside calibrating funds of a few thousand dollars to several million, even a few hundred thousand dollars; Enterprises invest onetime, benefit perennial.
The measuring instruments can be calibrated at any time if it has problem, it will be saved time and ensured quality.
Due to the measuring instruments do not need to send outside for calibrating, the production will not stop.
Enterprise train their measurement and technical personnel, can provide theoretical basis for t internal check technicians;
After training and test is qualified, will be awarded an internal check member certificate.
第一讲：计量仪器的重要性
1）计量是产品质量的重要保证
2）计量是节能降耗的重要手段和企业经济核算
的重要依据
3）计量对现代社会的影响
The importance of measuring instruments
1) Measurement is an important guarantee of the quality of products
2) Measurement is an important basis for an important means of saving energy and enterprise economic accounting
3) The influence of measurement on modern society.
第二讲：法定计量单位
1）国际单位制-辅助单位
2）国际单位制-导出单位
3）国际单位制-词头
4）国家选定的非国际单位
5）计量单位使用方法
6）计量值的换算
Legal units of measurement
1) The International System of Units - Auxiliary units
2) The International System of Units - derived units
3) The International System of Units - prefix
4) Selected by the state of non-international units
5) Usage for units of measurement
6) The Conversion for measurement values
第三讲：长度计量的几项基本原则
1）最小变形原则
①热变形 ②弹性变形
2) 阿贝原则
3) 封闭原则
The basic principles of the length measurement
1) The principle of minimal deformation
① Hot deformation ② the elastic deformation
2) Abbes principle
3) Closed Principle
第四讲：量块的基础知识
1) 量块的基本特征
2) 量块的等和级划分
3) 量块的等和级关系
Basic knowledge of the Gauge block
1) The basic characteristics of Gauge block
2) The class divides of Gauge block
3) The class relations of Gauge block
第五讲：测量基础知识
1）测量方法
2）有效数字
3）误差
4）精度
5）偏差、标准偏差和公差
6）测量不确定度
Basic knowledge of measurement
1) Measurement method
2) Significant figures
3) Error
4) Accuracy
5) Deviation, standard deviation and tolerance
6) Measurement Uncertainty
第六讲：计量仪器的配备与选择
计量仪器的配备要求
1）物料进、出厂的计量仪器；
2）原材料消耗和半成品流转的计量仪器；
3）定额指标管理的计量仪器
计量仪器主要特性
1）、有关工作范围的特性
2）、有关工作条件的特性
3）、有关响应方面的特性
4）、有关准确度方面的特性
5）、有关性能方面的特性
计量仪器的选择、采购
Equipment and choice for measurement instruments
The requirements for measurement instrument
1) The measurement instrument for material in and out of the factory
2) The measurement instrument for consumption of raw materials and semi-finished products flow
3) Norms and criteria for the management of measuring instruments
main characteristics of the measuring instruments
1) characteristics of the scope of work
2) characteristics of the working conditions
3) characteristics of the response
4) characteristics of the accuracy
5) performance characteristics
Selection and procurement of measurement instrument
第七讲：计量仪器的管理
1）、计量仪器的验收、入库；
2）、计量仪器的分类, 计量管理体系建立；
3）、计量器具借用、领用、保管制度;
4）、计量仪器的正确使用与维护保养；
5）、计量仪器的ABC分类管理；
6）、计量仪器周期检定、检查制度；
7）、计量仪器现场抽（检）查制度；
8）、C类计量仪器检查办法；
9）、计量仪器的标志；
10）、不合格设备及其数据处理。
Management of measuring instruments
1) Inspection, warehousing of measuring instruments
2) The classification of measuring instruments, metering management system established;
3) Measuring instruments borrowed, requisitioned custody system;
4) The correct use of measuring instruments and maintenance;
5) ABC classification management of measuring instruments;
6) Periodic testing and inspection system measuring instruments;
7) The system for checking measuring instruments;
8) The approach for checking C class measurement instrument;
9) sign of the measurement instrument;
10) Substandard equipment and data processing.
第八讲：计量仪器校准（针对学员的计量器具）
1）、测量标准的传递和追溯
2）、检定、校准、比对的概念
3）、强制计量管理（检定）的仪器
4）、计量检定规程
①千分尺检定规程 ②卡尺检定规程
③千(百)分表检定规程
、检定/校准的人员资格要求
6）、检定/校准的环境要求
7）、校准周期的确定方法
Calibration of measuring instruments (Apparatus) for the measurement of students'
1) Measurement standard pass and retrospective
2) Test, calibration, ratio on the concept
3) Compulsory metering management (test) instrument
4) Metrology and Verification
①Micrometer verification regulations ② caliper verification regulations
③ One thousand (hundred) meter testing procedures
5) Test / calibration personnel qualification requirements
6) The environmental requirements of the test / calibration
7) The method for determining calibration cycle
第九讲：国际质量/环境管理标准对计量的要求
1）、ISO9001标准
2）、TS16949标准
3）、ISO14001标准
4）、量规、仪器管理作业常见之缺失
5）、体系审核中常见量规仪器管理作业缺失
International quality/environmental management standard of measurement requirements
1) ISO9001 standard
2) TS1949 standard
3) ISO 14001 standard
4) Common deficiencies in the tasks of gauge instrument management
5) The common gauge instrument management work shortcoming in the system audit
第十讲：测量系统分析（MSA）简介
1）、量测系统
2）、量测系统基本特性
3）、GR&R分析（计量型）
4）、GR&R分析报告
5）、GO/NOGO分析（计数值型）
.Measurement Systems Analysis (MSA) Introduction
1) Measurement system
2) The basic characteristics of measurement system
3) GR & R analysis (measurement type)
4) GR & R analysis report
5) GO / NOGO analysis (count value type)
第十一讲:常见计量器具使用注意事项
1) 千分尺使用注意事项
2) 卡尺使用注意事项
3) 千 (百) 分表使用注意事项
Common measuring instruments Notes
1) Micrometer Notes
2) Caliper Notes
3) Note 1000 (hundred) points table
第十二讲: 常见计量器具的维修
1) 千分尺
2) 卡尺
3) 千 (百) 分表
4) 投影机 (精度补正, 角度补正等)
5) 硬度计
①洛氏硬度计 ②维氏硬度
Maintenance of common measuring instruments
1) Micrometer
2) Caliper
3) 1000 (hundred) points table
4) Projector (accuracy correction angle correction, etc.)
5) Hardness Tester
① Rockwell hardness tester (2) Vickers hardness
1）计量是产品质量的重要保证
2）计量是节能降耗的重要手段和企业经济核算
的重要依据
3）计量对现代社会的影响
The importance of measuring instruments
1) Measurement is an important guarantee of the quality of products
2) Measurement is an important basis for an important means of saving energy and enterprise economic accounting
3) The influence of measurement on modern society.
第二讲：法定计量单位
1）国际单位制-辅助单位
2）国际单位制-导出单位
3）国际单位制-词头
4）国家选定的非国际单位
5）计量单位使用方法
6）计量值的换算
Legal units of measurement
1) The International System of Units - Auxiliary units
2) The International System of Units - derived units
3) The International System of Units - prefix
4) Selected by the state of non-international units
5) Usage for units of measurement
6) The Conversion for measurement values
第三讲：长度计量的几项基本原则
1）最小变形原则
①热变形 ②弹性变形
2) 阿贝原则
3) 封闭原则
The basic principles of the length measurement
1) The principle of minimal deformation
① Hot deformation ② the elastic deformation
2) Abbes principle
3) Closed Principle
第四讲：量块的基础知识
1) 量块的基本特征
2) 量块的等和级划分
3) 量块的等和级关系
Basic knowledge of the Gauge block
1) The basic characteristics of Gauge block
2) The class divides of Gauge block
3) The class relations of Gauge block
第五讲：测量基础知识
1）测量方法
2）有效数字
3）误差
4）精度
5）偏差、标准偏差和公差
6）测量不确定度
Basic knowledge of measurement
1) Measurement method
2) Significant figures
3) Error
4) Accuracy
5) Deviation, standard deviation and tolerance
6) Measurement Uncertainty
第六讲：计量仪器的配备与选择
计量仪器的配备要求
1）物料进、出厂的计量仪器；
2）原材料消耗和半成品流转的计量仪器；
3）定额指标管理的计量仪器
计量仪器主要特性
1）、有关工作范围的特性
2）、有关工作条件的特性
3）、有关响应方面的特性
4）、有关准确度方面的特性
5）、有关性能方面的特性
计量仪器的选择、采购
Equipment and choice for measurement instruments
The requirements for measurement instrument
1) The measurement instrument for material in and out of the factory
2) The measurement instrument for consumption of raw materials and semi-finished products flow
3) Norms and criteria for the management of measuring instruments
main characteristics of the measuring instruments
1) characteristics of the scope of work
2) characteristics of the working conditions
3) characteristics of the response
4) characteristics of the accuracy
5) performance characteristics
Selection and procurement of measurement instrument
第七讲：计量仪器的管理
1）、计量仪器的验收、入库；
2）、计量仪器的分类, 计量管理体系建立；
3）、计量器具借用、领用、保管制度;
4）、计量仪器的正确使用与维护保养；
5）、计量仪器的ABC分类管理；
6）、计量仪器周期检定、检查制度；
7）、计量仪器现场抽（检）查制度；
8）、C类计量仪器检查办法；
9）、计量仪器的标志；
10）、不合格设备及其数据处理。
Management of measuring instruments
1) Inspection, warehousing of measuring instruments
2) The classification of measuring instruments, metering management system established;
3) Measuring instruments borrowed, requisitioned custody system;
4) The correct use of measuring instruments and maintenance;
5) ABC classification management of measuring instruments;
6) Periodic testing and inspection system measuring instruments;
7) The system for checking measuring instruments;
8) The approach for checking C class measurement instrument;
9) sign of the measurement instrument;
10) Substandard equipment and data processing.
第八讲：计量仪器校准（针对学员的计量器具）
1）、测量标准的传递和追溯
2）、检定、校准、比对的概念
3）、强制计量管理（检定）的仪器
4）、计量检定规程
①千分尺检定规程 ②卡尺检定规程
③千(百)分表检定规程
、检定/校准的人员资格要求
6）、检定/校准的环境要求
7）、校准周期的确定方法
Calibration of measuring instruments (Apparatus) for the measurement of students'
1) Measurement standard pass and retrospective
2) Test, calibration, ratio on the concept
3) Compulsory metering management (test) instrument
4) Metrology and Verification
①Micrometer verification regulations ② caliper verification regulations
③ One thousand (hundred) meter testing procedures
5) Test / calibration personnel qualification requirements
6) The environmental requirements of the test / calibration
7) The method for determining calibration cycle
第九讲：国际质量/环境管理标准对计量的要求
1）、ISO9001标准
2）、TS16949标准
3）、ISO14001标准
4）、量规、仪器管理作业常见之缺失
5）、体系审核中常见量规仪器管理作业缺失
International quality/environmental management standard of measurement requirements
1) ISO9001 standard
2) TS1949 standard
3) ISO 14001 standard
4) Common deficiencies in the tasks of gauge instrument management
5) The common gauge instrument management work shortcoming in the system audit
第十讲：测量系统分析（MSA）简介
1）、量测系统
2）、量测系统基本特性
3）、GR&R分析（计量型）
4）、GR&R分析报告
5）、GO/NOGO分析（计数值型）
.Measurement Systems Analysis (MSA) Introduction
1) Measurement system
2) The basic characteristics of measurement system
3) GR & R analysis (measurement type)
4) GR & R analysis report
5) GO / NOGO analysis (count value type)
第十一讲:常见计量器具使用注意事项
1) 千分尺使用注意事项
2) 卡尺使用注意事项
3) 千 (百) 分表使用注意事项
Common measuring instruments Notes
1) Micrometer Notes
2) Caliper Notes
3) Note 1000 (hundred) points table
第十二讲: 常见计量器具的维修
1) 千分尺
2) 卡尺
3) 千 (百) 分表
4) 投影机 (精度补正, 角度补正等)
5) 硬度计
①洛氏硬度计 ②维氏硬度
Maintenance of common measuring instruments
1) Micrometer
2) Caliper
3) 1000 (hundred) points table
4) Projector (accuracy correction angle correction, etc.)
5) Hardness Tester
① Rockwell hardness tester (2) Vickers hardness
◆ 讲师简介：经济学硕士、EMBA、CQT训练合格，曾长期担任著名大型日资企业生产经理、品质经理、技术部门经理、副总经理。在任某大型公司高级工程经理时，成功的将精益生产系统在数家分公司推广、培训与实施。十多年的从业经历，先后培养了大批优秀的生产管理人才。尤其是在电子、塑胶、印刷及文具、光学仪器、IT、机械行业，有着较为丰富的经验。
◆ 辅导企业：曾为康能特、贯新集团、永志印务、高雅电溶、建滔化工集团、立贸电线、盛德电子、久立光电、梅华表业、恒磁金属、创磁电子、大洋电机、松下电工、富声达、东新、科达五金、宝信金属、日正弹簧、健益五金、星协昌精密机械、亚洲化学、百瑞科技、松下万宝、华晶电子、松维线路板、台达电子、汇侨电子、协兴电子、东骅电子承等上百家企业提供辅导和培训。
◆ 授课风格：谢老师不仅具有扎实的理论功底，更有丰富的实践经验，讲解方式生动活泼，运用案例分析进行启发式互动教学，使学员在轻松愉快的气氛中掌握原本抽象的管理技术。
◆ 辅导企业：曾为康能特、贯新集团、永志印务、高雅电溶、建滔化工集团、立贸电线、盛德电子、久立光电、梅华表业、恒磁金属、创磁电子、大洋电机、松下电工、富声达、东新、科达五金、宝信金属、日正弹簧、健益五金、星协昌精密机械、亚洲化学、百瑞科技、松下万宝、华晶电子、松维线路板、台达电子、汇侨电子、协兴电子、东骅电子承等上百家企业提供辅导和培训。
◆ 授课风格：谢老师不仅具有扎实的理论功底，更有丰富的实践经验，讲解方式生动活泼，运用案例分析进行启发式互动教学，使学员在轻松愉快的气氛中掌握原本抽象的管理技术。